Air Abrasor 55 Fossil Preparation - Air Tools, Air
Abrasor, Abrasive Blasting of
removing Matrix and Bruising. Main Menu > Geological Tools > Preparation Tools > Air Abrasor 55
The air Abrasion system is a special pen that blasts fine
particles to cut away matrix, clean and remove bruising
often caused by hand tools from your rocks and fossils.
The Air abrasion 55 system runs at 50psi using
Aluminium Oxide as a compound for cutting. The nozzle is
narrow for very fine work and can be used to completely
remove matrix on softer material such as clays, shale's and
soft chalk.
The Air Abrasor Cup holds the compound which is pressurised.
The Air and particles are forced out of the Air Abrasor Tool,
cleaning your fossils. This tool works at 50PSI.
Ideal for a fast cutting and used for preparing fossils using
Air Grit Blasting. This is F220 grade for a fast cutting
speed. We sell this product in large containers, holding 5kg
with a carry handle. They have a screw lid for easy storage.
Brand new European manufactured professional compressor,
with
a 24L tank. Ideal for preparation. 116psi pressure output
with
a 1.1kw motor. Can be transported on its side. Long
maintenance free life. Contains Regulator and pressure gauge
with wheels and transport handle.
NOT SUITABLE FOR
OVERSEAS ORDERS DUE TO AIR RESTRICTIONS.
Safety Air Regulator with Shut-off
Control, and gauge to obtain the
correct pressure level. Safe Working Pressure 30-120psi. Inlet Thread 1/4”BSP. Outlet Thread 1/4”BSP
View Basket
Recover Basket
Print page
